Description:
Standard Series
Feeding Speed:36m/min
Features:
 | CENTRALIZED PRESSURE REGULATION
* All pressure regulations for the entire pneumatic system are centralized at front of the machine for added convenience for pressure regulations.
* Sectional pressure adjustments for all pressure rollers ensure consistent pressure. |  | POWERED INFEED TABLEROLLER
The roller in the infeed table is powered, providing a smooth feeding effect for hard-feeding stock. |  | VERTICAL SPINDLE ADJUSTMENT UP TO 60 MM
It allows to fit several tools on the vertical spindle, eliminating troublesome cutter change. The 60mm spindle adjustment provides full utilization for a single cutter. |  | SIDE FRONT PRESSURE PLATE ON LEFT VERTICAL SPINDLE
It fully eliminates unsmooth problem when feeding short or narrow stock.The pressure plate is easy to adjust. |  | CENTRALIZED LUBRICATION
The spindles are lubricated by the centralized lubrication system for convenience. |  | SEPARATED MOTOR AND SPINDLE
* Separate mounting of motor and spindle eliminates spindle vibration.
* Fitted with ahigh speed belt for power transmission, this configuration enables a smooth moulding effect and close tolerance result while in heavy cutting. | | Optional: |  | UNIVERSAL SPINDLE
* This spindle can be tilted for complicated cutting jobs. |  | SPINDLE DIGITAL POSITIONING CONTROLLER
* Available to equip for controlling any spindle as requested.
* The digital positioning controller permits fast, convenient and high accuracy spindle positioning. |  | FEED MAGAZINE
* This mechanism provides maximum convenience for feeding stock into the machine, keeping downtime to the minimum, and increasing the rate of production.
* Especially helpful when cutting shortstock. |
Specifications:
| Model | GN-5S23 | GN-6S23 | GN-7S23 | GN-8S23 | | Capacity | Planing width | 10~230 mm. | 10~230 mm. | 10~230 mm. | 10~230 mm. | | Planing thickness | 7~160 mm. | 7~160 mm. | 7~160 mm. | 7~160 mm. | | Feeding speed. Inverter control | 6~36 M/min | 6~36 M/min | 6~36 M/min | 6~36 M/min | | Min. length of cut | 230 mm. | 230 mm. | 230 mm. | 230 mm. | | Spindle | Spindle speed | 6,000 r.p.m. | 6,000 r.p.m. | 6,000 r.p.m. | 6,000 r.p.m. | | Spindle diameter | Ø 40 mm. | Ø 40 mm. | Ø 40 mm. | Ø 40 mm. | | Adjustment of vertical spindle | 60mm. | 60mm. | 60mm. | 60mm. | | Adjustment of horizontal spindle | 20mm. | 20mm. | 20mm. | 20mm. | | Cutter Diameter | Tool cutting circle, 1st bottom spindle, min. to max. | Ø 125~160 mm. | Ø 125~160 mm. | Ø 125~160 mm. | Ø 125~160 mm. | | Tool cutting circle, vertical spindles, min. to max. | Ø 100~180 mm. | Ø 100~180 mm. | Ø 100~180 mm. | Ø 100~180 mm. | | Tool cutting circle, horizontal spindles, min. to max. | Ø 100~200 mm. | Ø 100~200 mm. | Ø 100~200 mm. | Ø 100~200 mm. | | Tool cutting circle, last bottom spindle, min. to max. | Ø 100~250 mm. | Ø 100~250 mm. | Ø 100~250 mm. | Ø 100~250 mm. | | Motor Horsepower | Spindle motor | 7.5 HP, 10 HP | 7.5 HP, 10 HP | 7.5 HP, 10 HP | 7.5 HP, 10 HP | | Feeding motor. Invertor | 5 HP | 5 HP | 5 HP | 5 HP | | Others | Table adjustment | 12 mm. | 12 mm. | 12 mm. | 12 mm. | | Infeed table length | 1,800 mm. | 1,800 mm. | 1,800 mm. | 1,800 mm. | | Feed roller diameter | Ø 140 mm. | Ø 140 mm. | Ø 140 mm. | Ø 140 mm. | | Feed roller width | 2 x 50 mm. | 2 x 50 mm. | 2 x 50 mm. | 2 x 50 mm. | | Machine dimension (LxWxH mm.) | 3,650x1,930
x1,800 | 4,250x1,930
x1,800 | 4,670x1,930
x1,800 | 4,960x1,930
x1,800 | | Packing dimensions (LxWxH mm.) | 3,800x2,100
x2,100 | 4,400x2,100
x2,100 | 4,820x2,100
x2,100 | 5,110x2,100
x2,100 | | Net weight | 3,600 kgs. | 4,100 kgs. | 4,600 kgs. | 5,000 kgs. | | Gross weight | 4,100 kgs. | 3,500 kgs. | 5,200 kgs. | 5,700 kgs. |
All specifications , dimensions and design characteristics shown in this catalogue are subject to change without notice. |
